Whether you own a masticating, cold press, or centrifugal juicer, cleaning it properly is essential to ensure that your juicer works efficiently and doesn’t have any build-up of bacteria. To make sure your juicer gets the proper care it needs, here’s our comprehensive guide on how to clean a juicer properly.
Step 1: Disassemble
The first step in cleaning your juicer is to disassemble all the removable parts and place them in a basin full of warm water mixed with detergent or non-citrus dish soap. Leave these parts soaking for a few minutes before scrubbing them with a kitchen brush or sponge for tough spots. Rinse off the soap residue and set aside to air dry after rinsing.
Step 2: Clean Jug/Container
Fill up the jug/container that accompanies your machine halfway with warm water and add a few drops of dish soap or detergent. Replace the lid and let it sit for five minutes so that the detergent has time to loosen any stuck-on residues from inside. Remove the lid and scrub away any sticky patches with a kitchen brush or sponge before emptying out the remaining solution and rinsing the container thoroughly under running water. Allow it to air dry afterward.
Step 3: Clean Filter Screen
If you have a type of juicer that contains detachable filter screens, remove them from your machine and wash them by hand with warm water and some mild detergent or non-citrus soap until all residue buildup is gone. Rinse off any remaining soap residue once done, then leave those pieces out to air dry completely before replacing back into their base unit after they’re dry.
Step 4: Wipe Machine Base
For the main body unit of your juicer (or its motor base), use either damp kitchen towels or paper towels doused with white vinegar to wipe down all surfaces – this will help sanitize any bacteria on contact as well as break down dirt particles off its surface area. Once done, unplug the device from its power source (if necessary) before storing it away in an area free from dust particles when not in use.
By following these simple steps above regularly – especially if you use your juicer frequently – you can keep it working at its peak performance for years! So go ahead and make sure to clean up your appliance properly next time so that you can enjoy pristine-tasting juices each time!
The Disadvantages of Not Cleaning Your Juicer Properly
Not cleaning your juicer properly can lead to some serious consequences – from bacteria buildup to damaging your machine in the long run. If you don’t keep your juicer clean and well-maintained, here are some of the potential problems you should be aware of:
· Bacteria Buildup: Without proper cleaning, residue and sugary juice will accumulate on your juicer’s components and blades – creating a perfect breeding ground for bacteria such as E.coli, Salmonella, and Staphylococcus. These types of bacteria can cause severe food poisoning if ingested, so it’s important to ensure that all parts of your juicer are regularly cleaned with warm water and soap or vinegar.
· Poor Performance: When residue builds up inside your juicer over time, it will reduce its performance. This means that it’ll take longer to make juice and yield less than when it was first purchased. To avoid this, make sure that you’re giving your juicer regular maintenance by disassembling its parts for deep cleaning at least once a month (more often if used frequently).
· Damage to Components: If left uncleaned for too long, accumulated residues can grind away at the motor base and other component parts of the machine over time – leading them to become worn out quicker than expected. On top of that, metal blades could also become blunt and lose their slicing/chopping efficiency due to having residues accumulate onto them over time. Regularly cleaning these pieces would prevent this from happening!
It’s easy enough to maintain a clean juicer with regular maintenance but failing to do so can have some serious consequences on not only its performance but also potentially putting one’s health at risk if ingested – so make sure that you’re caring for yours properly!
Summary on Cleaning Your Juicer
Regularly cleaning your juicer is essential for the proper functioning of your machine and the safety of you and your family. To clean your juicer, first disassemble all removable parts and soak them in a basin full of warm water mixed with detergent or non-citrus dish soap. After soaking, scrub these pieces with a kitchen brush or sponge before rinsing off any remaining soap residue. Next, fill up the container accompanying the machine halfway with warm water and some dish soap or detergent, let it sit for five minutes, then scrub away any sticky patches with a kitchen brush or sponge before rinsing thoroughly under running water. If applicable, remove detachable filter screens from the machine to wash them by hand with warm water and mild detergent or non-citrus soap until all residue buildup is gone before air drying completely. Lastly, use either damp kitchen towels or paper towels doused with white vinegar to sanitize and wipe down the main body unit of the juicer before storing it away in an area free from dust particles when not in use.